HOME | PRODUCTS | FAQS | SITE MAP | CONTACT US

UNIVERSAL LID

Universal Replacement Lid
Conversions for standard RV vent caps

Converts the conventional cap base into a proper vent that draws fumes and inhibits down drafts.
If you existing vent base is in good condition and is sealed property into the roof membrane, the lid of the “360 Siphon” can be installed on to most bases.

If your existing vent cap has a damaged or missing top section, and you occasionally smell tank odors, now is the time to resolve both issues!

Instructions

Click here to view & print the Universal Lid Cap Modification instructions
(.pdf format)

Features

Draws out tanks fumes in all wind conditions
No moving parts
Built-in bug screen
Low profile, only 2-1/2" high, fits under railings, less vulnerable to low branches
Eliminates any possibility of stack down drafts
Operates with air movement as low as 3mph
UV resistant, durable high impact plastic
Easy installation on the RV roof top
Functions while driving or stationary

Benefits

No odors, due to increased ventilation and the restriction of down drafts
Elimination of debris and insects entering the system via the stack
Lower profile and extremely rugged UV resistant polycarbonate plastic, ensuring a long life span
A tank's capacity can be maximized, without inhaling foul smelling air
Continual draw of fumes, pulls fresh air into the tank, resulting in an increase in aerobic action, significantly increasing the breakdown of solid waste

Universal Lid Specs

The kit comes complete with a bug screen, stainless steel screws, sealant collar and instructions.

Constructed of high impact poly carbonate UV rated places
Includes installation kit, screws, bug screen and water collar

Installation

Installing the Universal Lid requires cutting, measuring, drilling and caulking. If you are uncertain on completing these tasks, contact your local RV Service Shop to complete the installation.

Installation instructions for the Universal Lid
Click here for printable instructions for all 3 cap styles (.pdf format)

Package Contents

Click on the above image for a larger view

The “Universal Lid” kit has instructions for converting the standard three vent cap bases, into a very functional fume extractor. The kit is complete with stainless steel screws, bug screen and a water sealant collar.

Package dimensions: 10.5 in x 6.5 in.
Total packaged weight: approximately 1/3 lb Most standard bases are constructed of light gauge plastics that are easily damaged by the suns UV’s.

In some cases it is not feasible to secure the lid due to brittle broken down plastic. If a base is still pliable with no visible sealant cracks, the Universal lid will enable that base to function within 75 % as the “360 Siphon”, as well as protect the base and seal from the sun due to its wide diameter overhang.

Illustrations

Turn these existing vent caps into fume extractors

Cap #1

Cap #2

Cap #3

Above vent caps shown below with our Universal Lid solution installed

Cap #1 solution

Cap #2 solution

Cap #3 solution

Note:

If the existing cap base is not pliable, has either cracks or is brittle (due to age and the sun) or if the seal to the roof has deteriorated, do not attempt to attach the Siphon lid. The risk of water seeping thru a weathered vent base or seal is not worth it. If this is the case, it’s a good time to replace the complete unit, and properly reseal to the roof. The complete “360 Siphon” fume extractor, is available. Vent base modification requires a little work, involving a hack saw, filing, drilling into plastic and gluing. If you are not sure, consult your local RV dealer.

Pricing Order Now	1 Universal Lid: $19.95 + $5.95 Shipping & Handling US funds will be adjusted by 1-3 % due to the Cdn exchange rate

	2 Universal Lids: $34.95 + $6.95 Shipping & Handling US funds will be adjusted by 1-3 % due to the Cdn exchange rate
	Dealers please contact us directly for 'Dealer Pricing'
US Checks are also accepted for this product. Click here for the mail-in order form in US pricing.

HOME | PRODUCTS | FAQS | SITE MAP | CONTACT US

360 Products Inc.
Toll-Free: 1.866.467.8360 Fax: 604.980.9643
Email: rv360@shaw.ca